Brother Ink Cartridges Does Anyone Know How I Can Refill My Brother LC1000 Ink Cartridges?

Does anyone know how i can refill my brother LC1000 ink cartridges? - brother ink cartridges

The cartridge is in a case such as open houses book.Before You must cut off the label on the underside as it prevented the opening.

Open the cartridge casing (shell).

The cartridge casing (shell removed).

It is a round hole (also) on the cartridge. Within the bore is either a rubber stopper. Use a drill and the thumb into the rubber stopper.
Note: do not bump or press release the pressure.

Put the needle on the syringe and fill the syringe with ink.

Insert the needle through the hole in the top and bottom of the cartridge. Make sure that the needle (albeit strong) is not pressed against the bag, and holes.

Slowly inject 10cc of ink into the cartridge case.

Remove the syringe with the needle and sealing the hole with candle wax.
Insert the new cartridge, which is covered (Shell), and use a piece of tape on both sides of the casing to hold together (Shell).

The cartridge (s) and run 1 to 3 cycles of purification Replace passed through the printer.